Shell end mill arbour
• Made of alloyed case hardening steel
• Face end with cooling channel holes
• Hardened 58 ± 2 HRC, min. 0.5 mm deep
• Tensile strength in core after case hardening approx. 950 N/mm²
• Taper DIN 254
• Taper angle tolerance AT3
• Concentricity ≤ 0.006 mm
• Balancing quality G 2.5 at 25000 min-1
• To nest tools with cross groove acc. to DIN 1880
Supplied: diameter head mount with cutting retaining screw.
| EAN | Taper shank | Mandrel Ø | Mandrel length | Projection length | Offset Ø | Standard |
|---|---|---|---|---|---|---|
| 4317784754088 | HTS-A63 | 16 mm | 17 mm | 45 mm | 38 mm | DIN 69893 |
| 4317784754071 | HTS-A63 | 16 mm | 17 mm | 100 mm | 38 mm | DIN 69893 |
| 4317784754064 | HTS-A63 | 22 mm | 19 mm | 50 mm | 48 mm | DIN 69893 |
| 4317784754057 | HTS-A63 | 22 mm | 19 mm | 100 mm | 48 mm | DIN 69893 |
| 4317784754040 | HTS-A63 | 27 mm | 21 mm | 60 mm | 58 mm | DIN 69893 |
| 4317784754033 | HTS-A63 | 27 mm | 21 mm | 100 mm | 58 mm | DIN 69893 |
| 4317784754026 | HTS-A63 | 32 mm | 24 mm | 60 mm | 78 mm | DIN 69893 |
| 4317784754019 | HTS-A63 | 32 mm | 24 mm | 100 mm | 78 mm | DIN 69893 |
| 4317784754002 | HTS-A63 | 40* mm | 27 mm | 60 mm | 88 mm | DIN 69893 |
| 4317784753999 | HTS-A63 | 40* mm | 27 mm | 100 mm | 88 mm | DIN 69893 |
| 4317784753982 | HTS-A100 | 16 mm | 17 mm | 45 mm | 38 mm | DIN 69893 |
| 4317784753975 | HTS-A100 | 16 mm | 17 mm | 100 mm | 38 mm | DIN 69893 |
| 4317784753968 | HTS-A100 | 22 mm | 19 mm | 50 mm | 48 mm | DIN 69893 |
| 4317784753951 | HTS-A100 | 22 mm | 19 mm | 100 mm | 48 mm | DIN 69893 |
| 4317784753944 | HTS-A100 | 27 mm | 21 mm | 50 mm | 58 mm | DIN 69893 |
| 4317784753937 | HTS-A100 | 27 mm | 21 mm | 100 mm | 58 mm | DIN 69893 |
| 4317784753920 | HTS-A100 | 32 mm | 24 mm | 60 mm | 78 mm | DIN 69893 |
| 4317784753913 | HTS-A100 | 32 mm | 24 mm | 100 mm | 78 mm | DIN 69893 |
| 4317784753906 | HTS-A100 | 40* mm | 27 mm | 60 mm | 88 mm | DIN 69893 |
| 4317784753890 | HTS-A100 | 40* mm | 27 mm | 100 mm | 88 mm | DIN 69893 |